Electricians Who Actually Know Arlington
Arlington is one of Jacksonville's most established neighborhoods -- single-story ranch homes on quarter-acre lots with mature oak trees lining streets off University Boulevard and Merrill Road. It is not a trendy new development. It is a real neighborhood with families who have lived here for decades, and it has the electrical systems to prove it. Most of the housing stock in Arlington was built between the 1950s and the 1970s, and we have been inside enough of those homes to know exactly what we are usually dealing with before we even open the panel.
Pure Power Electrical serves Arlington and the Regency area for the full range of residential and commercial electrical work. Whether you are getting a home inspection before a purchase, dealing with a panel that keeps tripping, or finally getting around to that generator you have been thinking about since the last hurricane, give us a call. We know this part of Jacksonville and we will give you a straight answer about what your home actually needs.
Aluminum Wiring in Arlington Homes
If your Arlington home was built between about 1965 and 1973, there is a real chance it has aluminum branch circuit wiring. During that period, copper prices spiked and builders across the country switched to aluminum. The problem is not the wire itself -- it is that aluminum expands and contracts more than copper with temperature changes, and over fifty-plus years, those repeated cycles can cause connections at outlets, switches, and the panel to loosen. Loose aluminum connections generate heat. Heat is how house fires start.
We see this constantly in Arlington, and we take it seriously. Insurance companies are increasingly flagging homes with aluminum branch circuit wiring, and some will not renew a policy without documentation that the wiring has been professionally remediated. We inspect aluminum wiring throughout Arlington and either install CO/ALR-rated devices at every outlet and switch (a legitimate and code-compliant repair) or perform a full copper rewire depending on what the home actually needs. Either way, we will tell you honestly what the situation is and what the options are.
Panel Upgrades in Arlington
A lot of Arlington homes still have their original 100-amp panels, and some have Federal Pacific Stab-Lok panels that were standard equipment in the 1960s and 70s. Federal Pacific panels are a known problem -- they are documented to fail to trip under fault conditions, which means they may not protect your home the way a breaker panel is supposed to. If your home has one, it is worth replacing regardless of whether you are planning any other electrical work.
Beyond Federal Pacific panels, even a standard 100-amp service in an older Arlington home is going to struggle with a modern HVAC system, a home office, multiple large appliances, and anything else a family runs today. We upgrade panels throughout Arlington, bringing homes up to 200-amp service that can actually handle what you are putting on it. Every upgrade includes the city permit and the inspection -- no shortcuts.
- Federal Pacific and Zinsco panel replacement
- 100-amp to 200-amp service upgrades
- Subpanel installation for garages, workshops, and additions
- Service entrance cable replacement
- GFCI and AFCI breaker upgrades for code compliance
Rewiring Arlington Homes
Some Arlington homes need more than a panel upgrade. Cloth-wrapped wiring (the insulation eventually becomes brittle and cracks), knob-and-tube remnants that were never fully replaced, and aluminum branch circuits in rough shape are all situations where a complete home rewire is the right answer. We do full rewires in occupied homes throughout Arlington, working efficiently to minimize disruption while doing the job the right way. Every rewire gets permitted and inspected.
Generator Installation in Arlington
Arlington is close to the St. Johns River and the Intracoastal, and during storm season the power outages here can stretch longer than in other parts of Jacksonville. Utility crews prioritize restoring service to the densest commercial areas first, and residential neighborhoods along the river end up waiting. A whole-home standby generator starts automatically within seconds of an outage and runs your entire house on natural gas without you having to do anything. We install Generac, Kohler, and Briggs & Stratton generators throughout Arlington, handling the concrete pad, transfer switch, electrical connection, gas line coordination, and all required permits.
EV Charger Installation in Arlington
More Arlington homeowners are switching to electric vehicles, and a Level 2 home EV charger is the practical solution for overnight charging instead of waiting days on a standard outlet. The catch in older Arlington homes is that the panel often needs to be upgraded before there is capacity for a dedicated 240V circuit. We handle the panel upgrade and the EV charger installation together in one project so you only deal with one contractor and one permit process.
Commercial Electrical in the Arlington and Regency Area
The Regency Square area and the Arlington Expressway corridor have a lot of older commercial buildings that need electrical updates -- aging panels, outdated lighting, tenant build-outs, and breaker replacements are common in these properties. We provide commercial electrical services throughout Arlington and Regency for property managers, business owners, and landlords who need licensed electrical work done right and on schedule.
About Arlington
Arlington stretches east from downtown along the Arlington Expressway with residential streets that branch off University Boulevard, Merrill Road, and Arlington Road. It is close to Jacksonville University and has a genuine neighborhood character that newer suburbs cannot replicate. The Renew Arlington initiative reflects a community that is invested in the area's future, not just passing through. These are homeowners who take care of their properties and want contractors who will do the same.
Frequently Asked Questions
Is aluminum wiring in my Arlington home dangerous?
It can be, yes. Aluminum branch circuit wiring installed between roughly 1965 and 1973 can develop loose connections over time that generate heat. We inspect and remediate aluminum wiring throughout Arlington. If your home was built in that window, it is worth having it looked at -- especially before any insurance renewals.
My Arlington home has a Federal Pacific panel. Is that a problem?
Yes. Federal Pacific Stab-Lok panels are documented to fail under fault conditions, meaning they may not trip when they should. Insurance companies increasingly refuse to cover homes with these panels. We replace them throughout Arlington.
Do you serve the University Boulevard and Merrill Road areas?
Yes. We work throughout Arlington including University Boulevard, Merrill Road, Arlington Road, and the residential neighborhoods toward Jacksonville University. We know this area well.
Do you install generators in Arlington FL?
Yes. We install Generac, Kohler, and Briggs & Stratton whole-home standby generators throughout Arlington. We handle all City of Jacksonville permits and the final inspection.
Do you install EV chargers in Arlington?
Yes. We install Level 2 EV chargers throughout Arlington. Many older homes here need a panel upgrade first -- we handle both in a single project.
Do you offer 24/7 emergency electrical service in Arlington?
Yes. Call (904) 544-0434 any time for emergency electrical service in Arlington and all of east Jacksonville.
Get a Free Estimate in Arlington
Call (904) 544-0434 or text us to schedule your free estimate. We will give you a straight answer about what your home needs and a fair price to get it done.
Other Areas We Serve
In addition to Arlington, we serve North Jacksonville, Riverside and San Marco, Jacksonville Southside, Mandarin, Jacksonville Beaches, and all of Northeast Florida. View all service areas.